Method of Application
Make the surface clean,
free of debris and oil. Chasing
should be completely filled
Apply the first layer of basic
coat over the entire surface
Apply the mesh from the
top to bottom of the wall by
pressing it into the first layer
of the base coat (starting
from the centre then out to
the side).
Apply the rest of the base
coat keeping the mesh
sandwiched between the two
coats
Apply at least 3 mm of upper
coat material on top of the
base coat
Three Easy Steps to Use Gyproc® BOND it
STEP 1
Open and stir the
contents
STEP 2
Apply with a paint
brush
STEP 3
Dry for 24 hrs. Surface
ready for plastering